To get the most out of your iPad, you will want to make sure that it is fully charged. Here are some things that can go wrong and how to fix them.

The “ipad not charging fix” is a common issue that many people are experiencing. The cause of the problem is usually due to a faulty power adapter, but it can also be caused by a damaged or loose connection on the Lightning port.

If your iPad won’t charge, try one of these seven tried-and-true remedies.

why is my iPad not charging

What’s the deal with my iPad not charging?

You may find many iPad users often searching on the web – What’s the deal with my iPad not charging? This can be really a frustrating issue and can make any iPad user think that something has gone wrong with his expensive tablet. Fortunately you need not worry if you see your iPad has stopped charging as there are proven solutions to the actual causes behind – why is iPad not charging. Both hardware and software issues may be the reasons at the back of this problem. In this article I am going to show the most common reasons behind ‘iPad not charging’ issue and what can you do to fix the same before heading to an Apple support center.

What’s the deal with my iPad not charging?

Before you can try to fix yourself the charging problem of your iPad, the first thing you need to understand – What’s the deal with my iPad not charging?

The most prevalent causes for your iPad not charging or charging slowly are listed below.

1. A lighting wire that has been damaged;

2. Using a charging adaptor that is incompatible;

3. Dust or debris clogging the charging port;

4. Using the computer’s low-power USB ports as a power source;

5. Failure to maintain an adequate operating temperature for your iPad;

How do you repair an iPad that won’t charge?

Now that you know the most frequent reasons why your iPad isn’t charging, utilize the methods below to resolve the issues that might be causing this ‘no charging’ problem. Before going on to the next step, be sure the issue has been fixed.

Step 1: Check to see whether your iPad is charging or not.

The first step in resolving the problem is to determine whether or not your iPad is charging. Connect your device to the USB charging cable that comes with your iPad and then firmly plug the cord into one of the power sources listed below:

a. A USB power adaptor hooked into a wall socket; b.

ii. On a computer, a USB port that supports USB 2 or later;

iii. A USB hub with power;

Next, let the device charge for an hour or longer. If your iPad is charging, you will see a lightning bolt appearing in the battery icon 1642835086_33_Why-is-my-iPad-not-charging-Heres-why-and-how at the top right of the iPad’s screen.

Step 2: Restart your iPad by pressing the power button.

If you’re not sure why your iPad isn’t charging, try forcing it to restart as indicated below. There’s a strong probability that just restarting your iPad will fix your charging issue.

If your iPad doesn’t have a Home button, swiftly press and release the volume up button. After that, press and hold the volume down button for a few seconds, then press and hold the top button until your iPad restarts.

For an iPad with a Home button, press and hold the Home and Power buttons simultaneously until the Apple logo appears.

Step 3: Examine the lightning cord for any damage.

Charging difficulties might occur when the charging cable you use to power your iPad becomes worn out or broken. When the wire is still within the sheath, it might break. To see whether your iPad’s charging issue is caused by the lightning cord, try charging it with an alternative power cable. When you plug your iPad in and receive an error message claiming that your accessory isn’t supported or approved, it’s probable that the charging cable you’re using isn’t certified. As a result, make sure you’re utilizing Apple-certified USB charging cords at all times.

Step 4: Change your Adapter

In rare cases, charging an iPad with an unsuitable charging adaptor can result in ‘no charging’ or delayed charging. As a result, you must seek for the Correct Type of Adapter. The USB power adapter that comes with your iPad is the best option. You can charge your iPad using a 10W, 12W, or 18W USB-C power converter. Simply use the USB end of the charging wire that comes with your iPad to connect the tablet to the power adapter.

Step 5: Clean the charging port on your iPad.

If your iPad isn’t charging, it’s possible that the lightning port is blocked with dust or debris, preventing the charging cable from making a secure connection. Older iPads contain eight small pins that connect to the charging cable during the charging process, but later iPads have a USB-C connector with twenty-four connections. If any of these pins are obstructed by debris, the charging cable may not connect. As a result, it is advised that you use a flashlight to examine the charging ports to determine if any grit, lint, or other debris is blocking your charging cable from connecting to the iPad’s charging ports.

You may clean the lightning port by blowing out the dirt with compressed air or digging out the sticky dust with a toothpick. Do not put anything metallic in the iPad’s little charging port to prevent harm. Recharge your iPad by firmly inserting the USB cord into the tablet and connecting it to a power source after cleaning the ports.

Step 6: Change to a different power source.

Your iPad may display the ‘Not Charging’ warning when connected to a USB extended port on a Mac or PC machine. Because most USB ports on computers can’t offer enough power to charge an iPad, this is the case. Even though your iPad says it’s charging, it’s just charging slowly and draining the battery while you’re using it.

As a result, switching to a different power source is the best option. The simplest way to eliminate the ‘Not Charging’ message from appearing is to connect the iPad straight into a wall socket using the power adapter that comes with it. Make that the cable is firmly and completely inserted into the iPad, the USB end is securely hooked into the power adapter, and the adapter connector is firmly plugged into the wall outlet.

Step 7: Maintain an appropriate working temperature for your iPad.

The Apple iPad’s operating temperature ranges from 32 to 95 degrees Fahrenheit. Temperatures that are too low or too high may cause your gadget to cease working properly. The battery life of your iPad might be shortened if you use it in hot weather. If your device’s temperature rises over its regular working range, charging may delay or stop entirely. As a result, don’t leave your gadget in direct sunlight for long periods of time or at very cold temperatures outside of its functioning range. Nonetheless, once your iPad is returned to normal operating temperatures, the battery life will return to normal.

Now that I’ve covered the most common reasons why iPads don’t charge and how to fix them, I’ll go over some of the often asked questions by iPad owners.

How do you repair a non-charging iPad?

To solve your iPad’s ‘no charging’ issue, follow these steps.

1. Restart your iPad by pressing the power button;

2. Change the charging cord;

3. Change the charging adaptor;

4. Maintain an appropriate working temperature for your iPad.

What is the battery life of an iPad?

After 1000 full charge cycles, an iPad battery typically retains 80% of its original capacity.

How do I know if I need to change the battery in my iPad?

Whether you want to see if your iPad battery has to be replaced,

Go to Settings > Battery> Tap battery health;

You may view a comparison of your current battery capacity to when it was new in this section.

You may also be interested in: iPhone battery draining quickly – proven solutions

Conclusion

After reading this piece, it should be evident that if you understand why my iPad isn’t charging, there’s no need to worry if your iPad stops charging unexpectedly. Almost often, the answers to the common causes of the issue presented in the article are able to address the problem.

If you still don’t see any improvements after attempting all of the above changes, there’s a good chance that something is amiss with the iPad’s hardware. In this instance, your only option is to contact Apple Support. Apple employees will evaluate your iPad and tell you if you need to replace the battery or have the device professionally repaired.

Please share the methods that have worked for you in the comments box below, so that we can benefit other readers.

The “ipad charging symbol” is a common issue for many iPad owners. The problem is that the device isn’t charging and there are a few different reasons why this might be happening. This article will go over what these reasons are, how to fix it, and how to prevent this from happening again.

Related Tags

  • ipad not charging to 100 percent
  • ipad won’t charge past 2 percent
  • how to clean ipad charging port
  • ipad pro not charging when plugged in
  • ipad charging port repair cost